AMS INSTANT PEEL3 PRESS-SIDE ACTIONS
Peel immediately while the shirt stays on the platen.
- 01PRESS
- 02PEEL ON PLATEN
- 03FINISH PRESS
REAL AMS PRESS FOOTAGE
THE PRESS LIFTS.YOU PEEL.
Peel your AMS DTF transfer immediately—while the shirt is still on the press.
No required cooling before peel No paid upgrade Standard on AMS DTF
Customer-approved artwork · unmuted source retained locally · page playback muted
REAL FOOTAGE Shirt remains on platen
PRESS. OPEN.
DON'T MOVE
THE SHIRT.
PEEL.Traditional cooling workflows move the garment away from the press before the carrier comes off. AMS Instant Peel can release immediately, with the garment exactly where you pressed it.WATCH THE WAIT DISAPPEAR
3 actions.
Not 8 stages.
COOLING WORKFLOW EXAMPLE8 HANDLING STAGES
The cooling loop shown in the AMS launch plan.
- 01PRESS
- 02REMOVE SHIRT
- 03MOVE TO COOL
- 04WAIT
- 05RETURN
- 06PEEL
- 07RELOAD PRESS
- 08FINISH PRESS
This compares the cooling workflow used in the AMS launch plan with the three press-side actions in the Instant Peel loop. Your transfer may still be peeled warm or cold when that better fits your process.
0104
01 · Printed film
Your artwork becomes the transfer.
Real AMS production footage shows the carrier film being printed for a customer job.Real AMS footage · edited across separate customer jobs · not the timed 50-shirt run
Scroll to drive the film
REAL AMS 50-SHIRT RUN
50 shirts.19:22.19 minutes 22 seconds.
One measured AMS production run. Each shirt received a 10-second initial press, immediate peel, and 10-second finish press.
TOTAL ELAPSED19:2219 minutes 22 seconds total elapsed1,162 seconds · 50 finished shirts
AVERAGE ELAPSED23.24seconds per shirt
PROGRAMMED PRESS TIME16:4020 seconds × 50 shirts
ALL HANDLING2:42beyond programmed press time
16:40 PROGRAMMED PRESS TIME
2:42 HANDLING
Measured in one AMS production run. Results vary by press, operator, garment, artwork, staging, and production conditions.
SAME TRANSFER.
Better workflow.
Instant Peel is not pretending the artwork suddenly looks different. The improvement happens at the press: the carrier releases immediately, so you can change how you produce.SAME TRANSFER. YOUR TIMING.
Instant by default.
Flexible by design.
Choose the release timing that fits the job in front of you.PEEL NOW
Peel the moment the press clears. Keep the shirt on the platen and keep moving.
OPERATOR MODE
Your AMS DTF
press recipe.
Save it to your phone. Keep it by the press. Run the same sequence every time. Save press instructions
AMS INSTANT PEEL
305°FAHRENHEIT
10SECONDS
HIGHTO FIRM PRESSURE
- 01Position
Place the transfer on the garment.
- 02Press
305°F · 10 seconds · high-to-firm pressure.
- 03Peel immediately
Remove the carrier as soon as the press clears.
- 04Finish
Second press for 10 seconds.
- 05Next
Move directly into the next garment.
STANDARD MEANS STANDARD
No upgrade required.
No premium film option. No instant-peel surcharge. No special checkbox. If you're ordering AMS DTF transfers, you're getting Instant Peel.Build Your Gang SheetPRESS-SIDE ANSWERS
Instant Peel FAQ.
Can I really peel an AMS DTF transfer immediately?+
Yes. Once the heat press opens and clears the garment, the carrier can be peeled while the shirt is still sitting on the platen.
Do I need to remove the shirt before peeling?+
No. Keeping the garment on the platen for the peel is one of the primary workflow benefits.
Does Instant Peel have to be peeled hot?+
No. AMS Instant Peel transfers may also be peeled warm or cold when that fits your workflow better.
Does Instant Peel cost extra?+
No. Instant Peel is standard on AMS DTF transfers; it is not a premium film option or paid upgrade.
What press settings should I use?+
Use 305 degrees Fahrenheit for 10 seconds at high-to-firm pressure, peel immediately, then finish press for 10 seconds.
Does Instant Peel change how the transfer looks or feels?+
The primary difference is workflow at the press. It is not a claim that the artwork suddenly looks or feels different.
DON'T WAIT FOR YOUR TRANSFERS.